Essential for installation on big butt shafts as well as conventional shafts, making grip installation much quicker. £12.76 (including VAT) | Tool for cutting steel shafts. £4.95 (including VAT) | Take off old grips, whipping thread, plastic colours and more with this knife. £3.02 (including VAT) |
 |
Utility Knife & 3m Tape Measure set £3.06 (including VAT) | Replacement hooked blades for utility knifes. Ideal for cutting grips from graphite shafts. £1.95 (including VAT) | Strong holding epoxy glue for building golf clubs From £8.67 to £29.99 (including VAT) |
|
This tool helps to easily install Ferrules onto your golf shaft £6.90 (including VAT) | A handy tool to help strip tape off of your golf shafts. £17.11 (including VAT) | 100" Roll of 1/2" wide lead tape, used for adding weight to your club heads From £6.94 to £45.97 (including VAT) |
|
When assembling clubheads these real Glass Shafting Beads can ensure that the golf shaft will be properly centered in the hosel. £7.10 (including VAT) | Lead Plug Weights are epoxied into the shaft tip before assembling the club and can be used to alter Swingweights. £0.51 (including VAT) | Add addional weight in the clubhead by inserting the powder into the shaft £16.99 (including VAT) |
|
Powdered Lead is used to add weight to your clubhead. £12.24 (including VAT) | 169 Piece swingweight kit with all the weights you will need to alter clubs swingweight. £52.10 (including VAT) | A must-have when adding lead ot tungsten powder down a steel shaft to increase swingweight. £2.55 (including VAT) |
|
A great tool for helping you to rejuvenate your grooves on your clubs. From £12.50 to £12.98 (including VAT) | | Golf Club Spinefinder finds the spine of any golf shaft £40.87 (including VAT) |
|
Just pour some solvent in the V-Groove Grip Remover and slide it into place -- a great way to save the grip for re-use! £22.47 (including VAT) | A Must Have for every shop. The 48" Ruler ruler not only measures shaft length, it tells you how to do the job! £10.99 (including VAT) | Accommodates all shaft sizes and allows you to easily remove shafts from clubheads £90.93 (including VAT) |
|
Cast Iron Vice with 40mm Jaws £5.10 (including VAT) | | |
|
5 Pack of replacement needles £12.76 (including VAT) | | Great tool for allowing you to catch and reuse grip solvent. £19.99 (including VAT) |
|
3/16" rod is ideal for driving off stubborn ironheads, applying heat inside a shaft tip to loosen woodheads. £12.98 (including VAT) | A loft and lie bending machine for altering your irons. Perfect for the clubmakers who only perform the task a few times a year. £295.00 (including VAT) | The professional Swingweight Scale from Golfsmith £139.99 (including VAT) |
|
Essential for bending irons loft or lie £52.98 (including VAT) | | Gauge used to identify the shaft size. £12.95 (including VAT) |
|
Identify the grip and shaft butt sizes of your clubs £12.95 (including VAT) | A device allowing you to easily check the loft and lie of your woods/irons £17.94 (including VAT) | Clean tape and residue from inside the grip before reinstalling a saved grip. £9.99 (including VAT) |
|
Used to give to give the factory finish to you through bore club heads when reshafting £5.98 (including VAT) | Used to give to give the factory finish to you through bore club heads when reshafting £5.98 (including VAT) | Probably our most used tool in the workshop! £19.99 (including VAT) |
|
Ideal for the busier clubmaker. Easily cuts graphite and steel shafts £117.35 (including VAT) | Use this to prep shafts, finish ferrules and remove any sharp edges from shafts. £64.94 (including VAT) | |
|
| | |
|
View Your Basket
